Hey guys, I am new to actually tuning and was wondering if this AFR table I generated seems OK to you more experienced tuners
my setup is a .302 stock bore/stroke 70mm TB, MAF delete, headers, CAI, explorer intake, electric fans, and Unknown cam. Stack iron heads. T5 trans
NA 302 AFR table looking for input
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 19
- Joined: Sat Aug 19, 2017 8:15 am
-
- Helpful MS/Extra'er
- Posts: 106
- Joined: Sat Jul 07, 2012 8:18 am
- Location: Cypress (Houston), Texas
Re: NA 302 AFR table looking for input
Looks fine to me.
Tuning in Houston, TX area
https://www.racebushings.com
https://www.racebushings.com
-
- Super MS/Extra'er
- Posts: 1341
- Joined: Mon Sep 05, 2011 1:20 pm
Re: NA 302 AFR table looking for input
Yup, good.
Graduate of EFI University.
I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
I build, repair, install and tune Megasquirt systems in North Dakota and beyond!
Re: NA 302 AFR table looking for input
Stock engine, except for the larger throttle body.
It looks pretty much like the base map from DIY (below)
It looks pretty much like the base map from DIY (below)
1988 Mustang GT, 59k miles, Orig Owner
ProCharger 600B I/C, 12psi, FRP Hdrs, Flwmstr F2, 3G Alt, Contour Fan & DCC, 3.55's, Prog Sprg, Subfms, UCA, LCA, FCA, Tokico 5's, Bridgestone RE-71R 245/40R17, Crane HI-6, Kirban FPR, MS2, DIYPNPF60, Spartan 2, C&L76mm blo-thru MAF, 47lb FRP-LU47
ProCharger 600B I/C, 12psi, FRP Hdrs, Flwmstr F2, 3G Alt, Contour Fan & DCC, 3.55's, Prog Sprg, Subfms, UCA, LCA, FCA, Tokico 5's, Bridgestone RE-71R 245/40R17, Crane HI-6, Kirban FPR, MS2, DIYPNPF60, Spartan 2, C&L76mm blo-thru MAF, 47lb FRP-LU47