Hey guys,
Does anyone happen to have a base tune for a gen 3 5.3? It's a 24x cam wheel. I also have an MS3x card wired up, with cam signal going to the x card. I wasn't sure what all options to select for the ignition settings. I've set up MS units in turbo 4 cylinders before, but I've always had a base tune to reference.
Thanks
Base Tune Request - Gen 3 5.3
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 106
- Joined: Sat Jul 07, 2012 8:18 am
- Location: Cypress (Houston), Texas
Re: Base Tune Request - Gen 3 5.3
The ECU definition won't match but open the MS3Pro Evo base tune in a temporary project for base tables and correction curves if that's what you're looking for as a place to start.
https://www.diyautotune.com/product/ms3 ... w-ecu-evo/
https://www.diyautotune.com/product/ms3 ... w-ecu-evo/
Tuning in Houston, TX area
https://www.racebushings.com
https://www.racebushings.com