LS coils, what dwell settings
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 20
- Joined: Wed Jun 18, 2014 12:14 pm
LS coils, what dwell settings
What is best to use for one lighting off a good bit of e85
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: LS coils, what dwell settings
D585 coils. 3.7ms. 850 on a 2jz and 1050 on an LS running 11.0 gas afr
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
-
- MS/Extra Newbie
- Posts: 20
- Joined: Wed Jun 18, 2014 12:14 pm
Re: LS coils, what dwell settings
D585 is the ones that discharge if you leave the dwell settings too long correct?
-
- Super MS/Extra'er
- Posts: 1978
- Joined: Wed Apr 15, 2009 11:31 am
- Location: Oxford, PA
- Contact:
Re: LS coils, what dwell settings
Yes. Watch the aftermarket replacements. Some don't like higher dwell and are more prone to that.
-
- MS/Extra Newbie
- Posts: 20
- Joined: Wed Jun 18, 2014 12:14 pm
Re: LS coils, what dwell settings
1000 isnt that much. Im talking more like 1500hp
D585 is the heat sink coil? We dont use those because of the wierd discharge never want to take the chance
D585 is the heat sink coil? We dont use those because of the wierd discharge never want to take the chance
Re: LS coils, what dwell settings
Sounds like you want IGN-1As then.
1995 Ford Lightning. Dart based 427 Windsor, Novi 2000, full sequential, E-85, etc. MS3X/v3.57
http://www.buildpics.org/
http://www.buildpics.org/
-
- MS/Extra Newbie
- Posts: 20
- Joined: Wed Jun 18, 2014 12:14 pm
Re: LS coils, what dwell settings
People have made that on OEM computers and stock coils, just which ones and cant see the dwell settings that ecu runs
Re: LS coils, what dwell settings
I'm sure they have, but at that level why take chances?GrannySShifting wrote:People have made that on OEM computers and stock coils, just which ones and cant see the dwell settings that ecu runs
1995 Ford Lightning. Dart based 427 Windsor, Novi 2000, full sequential, E-85, etc. MS3X/v3.57
http://www.buildpics.org/
http://www.buildpics.org/
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: LS coils, what dwell settings
Amen! I'm not having any issues with the d585 on e85, but switching to methanol and will be switching to ign1a coils as well. But like others, make sure you get legit onesRaymond_B wrote:I'm sure they have, but at that level why take chances?GrannySShifting wrote:People have made that on OEM computers and stock coils, just which ones and cant see the dwell settings that ecu runs
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
-
- Super MS/Extra'er
- Posts: 1978
- Joined: Wed Apr 15, 2009 11:31 am
- Location: Oxford, PA
- Contact:
Re: LS coils, what dwell settings
Been down that road and toasted a crank. Not fun.