Hi
I noticed today that my actual dead time seems off. I have my car set up sequential injection and my dead time is set at .765 @ 13.2 volts. i Am using curve 1 so from the way i read it the higher the voltage the smaller the dead time should be. My car is fairly steady around 13.6 to 13.8v so i expect a dead time of less than .765. At 13.6 v I am getting a dead time of 1.039 which is higher than my dead time at 13.2v. I am reading that from the fuel calculation summary gauges under fuel settings. Is there something that I am misinterpreting or is there a problem somewhere. Attached is my msq
Dead time. Something seems wrong
Moderators: jsmcortina, muythaibxr
Dead time. Something seems wrong
- Attachments
-
- 2017-11-28_14.43.08.msl
- datalog
- (160.55 KiB) Downloaded 28 times
-
- 2017-11-27_11.45.59 set up over run fuel cut.msq
- msq
- (287.57 KiB) Downloaded 25 times
Re: Dead time. Something seems wrong
Why is your coolant temperature at 249F?
1985 Dodge Omni GLH Turbo MicroSquirted 367whp http://www.msextra.com/forums/viewtopic ... 04&t=67324
Dead time. Something seems wrong
Air cooled porsche that’s a cylinder head temp. That’s normal.
Sent from my iPhone using Tapatalk Pro
Sent from my iPhone using Tapatalk Pro
Re: Dead time. Something seems wrong
MS3 firmware has a bug.
http://www.msextra.com/forums/viewtopic ... 31&t=66098
http://www.msextra.com/forums/viewtopic ... 31&t=66098
1988 Mustang GT, 59k miles, Orig Owner
ProCharger 600B I/C, 12psi, FRP Hdrs, Flwmstr F2, 3G Alt, Contour Fan & DCC, 3.55's, Prog Sprg, Subfms, UCA, LCA, FCA, Tokico 5's, Bridgestone RE-71R 245/40R17, Crane HI-6, Kirban FPR, MS2, DIYPNPF60, Spartan 2, C&L76mm blo-thru MAF, 47lb FRP-LU47
ProCharger 600B I/C, 12psi, FRP Hdrs, Flwmstr F2, 3G Alt, Contour Fan & DCC, 3.55's, Prog Sprg, Subfms, UCA, LCA, FCA, Tokico 5's, Bridgestone RE-71R 245/40R17, Crane HI-6, Kirban FPR, MS2, DIYPNPF60, Spartan 2, C&L76mm blo-thru MAF, 47lb FRP-LU47
-
- Site Admin
- Posts: 39620
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: Dead time. Something seems wrong
Had.
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".