Ethanol % fuel multiplier time.

Tuning concepts, methods, tips etc.

Moderators: jsmcortina, muythaibxr

Ethanol % fuel multiplier time.

Postby TomWright » Sat Dec 09, 2017 2:45 pm

I am wondering what are the typical response times for the fuel correction to occur.

I noticed in a data log that my ethanol % went from 83% - 67% back to 83% in about a second. Obviously this worries me as it could lean the motor out. (no drastic change in afr)

I am also unsure as to why it may have occurred but it was under heavy load and suspect it may be due to poor placement of the sensor.

This was logged on SD card so I didnt have the ethanol correction selected.

Tom
TomWright
MS/Extra Newbie
 
Posts: 18
Joined: Sun Jan 29, 2017 1:50 am

Re: Ethanol % fuel multiplier time.

Postby tryingbe » Sat Dec 09, 2017 5:53 pm

Are you using 1.5.1 firmware?

viewtopic.php?f=131&t=67568
tryingbe
Helpful MS/Extra'er
 
Posts: 94
Joined: Tue Sep 05, 2017 3:19 pm

Re: Ethanol % fuel multiplier time.

Postby TomWright » Sun Dec 10, 2017 5:08 pm

I am running 1.4 I think I will update,

Thanks
TomWright
MS/Extra Newbie
 
Posts: 18
Joined: Sun Jan 29, 2017 1:50 am


Return to Tuning

Who is online

Users browsing this forum: Bing [Bot] and 4 guests