I am wondering what are the typical response times for the fuel correction to occur.
I noticed in a data log that my ethanol % went from 83% - 67% back to 83% in about a second. Obviously this worries me as it could lean the motor out. (no drastic change in afr)
I am also unsure as to why it may have occurred but it was under heavy load and suspect it may be due to poor placement of the sensor.
This was logged on SD card so I didnt have the ethanol correction selected.
Tom
Ethanol % fuel multiplier time.
Moderators: jsmcortina, muythaibxr
Re: Ethanol % fuel multiplier time.
1985 Dodge Omni GLH Turbo MicroSquirted 367whp http://www.msextra.com/forums/viewtopic ... 04&t=67324
Re: Ethanol % fuel multiplier time.
I am running 1.4 I think I will update,
Thanks
Thanks