msdroid always reading signature

Use and development of MSDroid tuning software on Android

Moderators: jsmcortina, muythaibxr

msdroid always reading signature

Postby turbotankshane » Sun Mar 19, 2017 1:34 pm

I'm using a android 5.0 lollipop tablet, efianalytics bluetooth adapter. I've got successful pairing with the adapter, and I got msdroid to read the signature once and only once, and it told me it couldn't find my ecu definition on the server (msextra 3.4.2 firmware on microsquirt). I found my .ini and moved it into the same folder on the tablet, but ever since the first connection my tablet never gets past "reading signature." I've uninstalled/reinstalled the app, reset my connections and it continues to act the same. What do?
turbotankshane
MS/Extra Newbie
 
Posts: 3
Joined: Wed Mar 15, 2017 8:53 am

Re: msdroid always reading signature

Postby Gamemaster442 » Thu Apr 20, 2017 6:52 pm

Same problem as above three different devices Bluetooth turns solid blue reading signature but never connects.connected one time at first then just reading signature. This is EFI Source Bluetooth module Insignia 7-inch tab I am not that computer savvy.
Gamemaster442
MS/Extra Newbie
 
Posts: 2
Joined: Thu Apr 20, 2017 6:44 pm

Re: msdroid always reading signature

Postby Gamemaster442 » Sat Apr 29, 2017 7:01 am

This is what I receive from EFI Analytics
With the MicroSquirt you need to wire the power to the Bluetooth adapter so that it power cycles with the ECU. Also you want to make sure the switch position is closest to the antenna to make a connection.

Any time you make a connection and then loose it or shut the ECU off the Bluetooth adapter must be power cycled before a connection to the ECU will be possible that is why we recommend making the Bluetooth adapter power cycle with the ECU.

This option allows you to connect the power from an ign. source so it switches with the ECU then provides you with a USB connection so you can connect to the Bluetooth adapter.
https://www.amazon.com/GEREE-Converter- ... +converter

This is a cigarette cell phone charger, they usually cycled with the ignition so it would work as well.
https://www.amazon.com/RAVPower-Aluminu ... ll+charger

Thanks,

Brian H
EFI Analytics Inc
This works ... :yeah!: I was using the wall charger and not cycling each time
Gamemaster442
MS/Extra Newbie
 
Posts: 2
Joined: Thu Apr 20, 2017 6:44 pm

Re: msdroid always reading signature

Postby turbotankshane » Mon Jun 19, 2017 6:15 am

Ok, thanks for the reply. I got a new cigarette lighter outlet and wired it to ignition so the Bluetooth adapter cycles with the micro every time. So now it gets past the connection but it now won't ever get past "reading signature" again. It's been connected fine before, so I know I have the right .ini and all the right connection settings but it won't fully connect still.
turbotankshane
MS/Extra Newbie
 
Posts: 3
Joined: Wed Mar 15, 2017 8:53 am


Return to MSDroid

Who is online

Users browsing this forum: No registered users and 1 guest