is the latest version working for alpha10 yet?
Moderators: jsmcortina, muythaibxr
-
- Super MS/Extra'er
- Posts: 2631
- Joined: Sun May 29, 2011 10:28 am
- Location: birmingham ,Alabama. U.S.A.
is the latest version working for alpha10 yet?
just wondering if your newest version is working for the 3.3 alpha10 firmware yet? Its working so well for me I am going to stay on it but would love to get back to NOT having to lug theold dinosaur laptop around everywhere I go. Thanks
Ricky-
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
Re: is the latest version working for alpha10 yet?
Ah, it's not in the current release but the support for blockingfactor is literally the next little job I was going to do. Might get it done tonight hopefully. Therefore hopefully there will be a release for you to try in a day or two I'd hope if that's okay.
-
- Super MS/Extra'er
- Posts: 2631
- Joined: Sun May 29, 2011 10:28 am
- Location: birmingham ,Alabama. U.S.A.
Re: is the latest version working for alpha10 yet?
yeah thats cool man. Just wondering. Thanks.
Ricky-
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI
1995 Nissan 240sx, 403 LS strokerv8 N/A 6speed trans
MS3&MS3X v.3.0 PCB
42lb/hr Hi-Z inj.,230/232 @.050 on 114LSA cam
sequential fuel and sequential spark
LS3/LSA card MAF sensor
97 Mazda MX5
MS3 2002 vvt motor
.60 trim T4 Turbo at 15 PSI