How to disable tune difference check?
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 256
- Joined: Sat May 08, 2004 9:23 am
- Location: Finland
- Contact:
How to disable tune difference check?
Is there any way to disable tune difference check upon connection? I'm using the MSDroid as dashboard only and all tuning is done with a laptop. Therefore difference check and question if I want to use tune from controller or MSDroid project is a bit annoying and even possibly harmful. So it would be nice to set the MSDroid so it would automatically update tune from the controller. Is this possible somehow?
Arttu
-
- Super MS/Extra'er
- Posts: 1986
- Joined: Sat Jul 22, 2006 8:02 pm
- Location: Eureka, NV USA
- Contact:
Re: How to disable tune difference check?
Not sure about your Droid, but in TS: Options>Preferences>uncheck - Perform Difference Report On Connect
Ken
Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
-
- Experienced MS/Extra'er
- Posts: 256
- Joined: Sat May 08, 2004 9:23 am
- Location: Finland
- Contact:
Re: How to disable tune difference check?
Unfortunately it seems there isn't such setting in the MSDroid. Or at least I wasn't able to find anything like that.
Arttu
Re: How to disable tune difference check?
Hello,
Thanks for raising this. It hadn't occurred to me that some users might want MSDroid to automatically update its project tune from the controller. I've added it to the issues list to be done.
Trev
Thanks for raising this. It hadn't occurred to me that some users might want MSDroid to automatically update its project tune from the controller. I've added it to the issues list to be done.
Trev