MS2 333 release CAN EGT no data

Use and development of MSDroid tuning software on Android

Moderators: jsmcortina, muythaibxr

Post Reply
MS2tester
Master MS/Extra'er
Posts: 606
Joined: Sat Apr 11, 2009 12:54 pm
Location: Aalsmeer the netherlands
Contact:

MS2 333 release CAN EGT no data

Post by MS2tester »

i can,t seem to get any data over the can bus in msdroid
is this a settings issue or is the CAN protocol not supported in msdroid?
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: MS2 333 release CAN EGT no data

Post by jsmcortina »

You should likely update to the current firmware in any case.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
racingmini_mtl
Super MS/Extra'er
Posts: 9128
Joined: Sun May 02, 2004 6:51 am
Location: Quebec, Canada
Contact:

Re: MS2 333 release CAN EGT no data

Post by racingmini_mtl »

I'm not familiar with the current MSDroid release but early versions did not support CAN devices at the same time as the ECU. You had to have a stand-alone setup to view data on the CAN-EGT.

Maybe the latest version does support multi-device projects but I can't say. One thing is certain, the zip file you included does not contain the CAN-EGT ini file but only the link to it on the DIYAutotune web site.

Jean
jbperf.com Main site . . . . . . . . . . . . . . . . . . . . . . jbperf.com Forum
Image
MS2tester
Master MS/Extra'er
Posts: 606
Joined: Sat Apr 11, 2009 12:54 pm
Location: Aalsmeer the netherlands
Contact:

Re: MS2 333 release CAN EGT no data

Post by MS2tester »

new try with ms2_343B1
but still no luck :(
Post Reply