msdroid in tuning work ve and spark table not

Use and development of MSDroid tuning software on Android

Moderators: jsmcortina, muythaibxr

Post Reply
django
Helpful MS/Extra'er
Posts: 36
Joined: Wed Mar 25, 2015 9:23 am

msdroid in tuning work ve and spark table not

Post by django »

hai
I had installed from goole play ms droid
it works right, only tuning ve and spark, I can not set anything
I only see a black screen ,with the top in the left , VE Table 1, with the same spark.
.here you would surely be able to put the numbers higher or lower in the tabel.
i use a ms1 with v3board and the latest firmware
or should I buy pro,,,,??
What could be wrong
robocog
MS/Extra Newbie
Posts: 25
Joined: Tue Nov 20, 2007 3:06 pm

Re: msdroid in tuning work ve and spark table not

Post by robocog »

Any joy with this?

I have the same questions
(and the same blank screen)

If you go into the basic settings the spark and ve tables are there on my devices- and I have a "live" dot showing which bin is active (using a stim for testing)

I'm still learning how to drive msdroid and I'm sure I have missed a manual or something
Still trying to work out if I need to buy pro to get the other stuff showing up?

Regards
Rob
Post Reply