Page 1 of 1

msdroid always reading signature

Posted: Sun Mar 19, 2017 1:34 pm
by turbotankshane
I'm using a android 5.0 lollipop tablet, efianalytics bluetooth adapter. I've got successful pairing with the adapter, and I got msdroid to read the signature once and only once, and it told me it couldn't find my ecu definition on the server (msextra 3.4.2 firmware on microsquirt). I found my .ini and moved it into the same folder on the tablet, but ever since the first connection my tablet never gets past "reading signature." I've uninstalled/reinstalled the app, reset my connections and it continues to act the same. What do?

Re: msdroid always reading signature

Posted: Thu Apr 20, 2017 6:52 pm
by Gamemaster442
Same problem as above three different devices Bluetooth turns solid blue reading signature but never connects.connected one time at first then just reading signature. This is EFI Source Bluetooth module Insignia 7-inch tab I am not that computer savvy.

Re: msdroid always reading signature

Posted: Sat Apr 29, 2017 7:01 am
by Gamemaster442
This is what I receive from EFI Analytics
With the MicroSquirt you need to wire the power to the Bluetooth adapter so that it power cycles with the ECU. Also you want to make sure the switch position is closest to the antenna to make a connection.

Any time you make a connection and then loose it or shut the ECU off the Bluetooth adapter must be power cycled before a connection to the ECU will be possible that is why we recommend making the Bluetooth adapter power cycle with the ECU.

This option allows you to connect the power from an ign. source so it switches with the ECU then provides you with a USB connection so you can connect to the Bluetooth adapter.
https://www.amazon.com/GEREE-Converter- ... +converter

This is a cigarette cell phone charger, they usually cycled with the ignition so it would work as well.
https://www.amazon.com/RAVPower-Aluminu ... ll+charger

Thanks,

Brian H
EFI Analytics Inc
This works ... :yeah!: I was using the wall charger and not cycling each time

Re: msdroid always reading signature

Posted: Mon Jun 19, 2017 6:15 am
by turbotankshane
Ok, thanks for the reply. I got a new cigarette lighter outlet and wired it to ignition so the Bluetooth adapter cycles with the micro every time. So now it gets past the connection but it now won't ever get past "reading signature" again. It's been connected fine before, so I know I have the right .ini and all the right connection settings but it won't fully connect still.

Re: msdroid always reading signature

Posted: Sun Jul 02, 2017 6:27 am
by MS2tester
if you can get it to work
you might wanna check out a rasberry 3!
if you disable the touch sceen ( red wire) by hand or toggle switch you can boot it to a big screen
also less hassle with can modules

Re: msdroid always reading signature

Posted: Sun Jul 02, 2017 6:30 am
by MS2tester
:yeah!:

Re: msdroid always reading signature

Posted: Fri Jul 07, 2017 9:44 am
by NiceMan
I fight this program, we have BT and its connect to MS3 Pro Ultimate, tablet is paired whit ms3 nice but msdroid only show xxx.ini and its think this file easy 30min and nothing happend...
Possible 2-3 time get it work but... its too bad.
Its need get work more faster like 1-10 second.

Re: msdroid always reading signature

Posted: Fri Jul 07, 2017 9:58 am
by NiceMan
I fight this program, we have BT and its connect to MS3 Pro Ultimate, tablet is paired whit ms3 nice but msdroid only show xxx.ini and its think this file easy 30min and nothing happend...
Possible 2-3 time get it work but... its too bad.
Its need get work more faster like 1-10 second.

Re: msdroid always reading signature

Posted: Fri Jul 07, 2017 10:31 pm
by MS2tester
Have tried putting the proper. ini in this folder?
It might be neccesary to restart the tablet to clear the program cache

Re: msdroid always reading signature

Posted: Sat Jul 08, 2017 11:05 am
by NiceMan
*.ini is right and its copy to tablet and right tune copy there too, its sometime works but most time not...

Re: msdroid always reading signature

Posted: Thu Sep 21, 2017 11:11 am
by turbotankshane
I never was able to get it to work with the bluetooth adapter. I caved and bought a $6 android otg cable and it works great every time since the first time I plugged it in.