Seattle Washington - Tuning / Install / Consulting
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 409
- Joined: Sun Jan 30, 2005 11:13 pm
- Location: Monroe, Wa.
- Contact:
Seattle Washington - Tuning / Install / Consulting
I can do consulting, installs, tuning, remote tuning, harness building, pretty much anything MS.
located in Monroe, Washington and can travel.
Complete MS Repair / upgrade services also available.
Local References:
SEATTLEJESTER - MS2 v3.57 - 240z with a 7mgte
Ollie8974 - MS3X v3.57 - 79 Pontiac Trans Am
Chris S. - DIYPNP - Corolla GTS (ae86) with a 1.6L 16v 4age
Artimus Prime - MS2 v3 - Turbo VW Manx
subarvair - MS3X v3.57 - Corvair W/ Subaru EG33
turbobaja - MS3-PRO - 73 Baja 2110cc Turbo
located in Monroe, Washington and can travel.
Complete MS Repair / upgrade services also available.
Local References:
SEATTLEJESTER - MS2 v3.57 - 240z with a 7mgte
Ollie8974 - MS3X v3.57 - 79 Pontiac Trans Am
Chris S. - DIYPNP - Corolla GTS (ae86) with a 1.6L 16v 4age
Artimus Prime - MS2 v3 - Turbo VW Manx
subarvair - MS3X v3.57 - Corvair W/ Subaru EG33
turbobaja - MS3-PRO - 73 Baja 2110cc Turbo
Last edited by Mario on Wed Dec 10, 2014 1:54 am, edited 3 times in total.
Re: Seattle Washington
Just getting ready for first start. Depending how things go might need some advice.
Cheers,
Greg Moore
Cheers,
Greg Moore
Greg
1974 Jensen Healey
Lotus 906/907 engine (907 block, 906 crank, dry-sump, cylinder head, pistons, Cosworth BDA valves, springs, cam followers)
1974 Jensen Healey
Lotus 906/907 engine (907 block, 906 crank, dry-sump, cylinder head, pistons, Cosworth BDA valves, springs, cam followers)
-
- Master MS/Extra'er
- Posts: 409
- Joined: Sun Jan 30, 2005 11:13 pm
- Location: Monroe, Wa.
- Contact:
Re: Seattle Washington
Hi Greg, sounds good.
Looks like you have a great project in the works.
PM Sent
Looks like you have a great project in the works.
PM Sent
-
- MS/Extra Newbie
- Posts: 17
- Joined: Sat Aug 02, 2014 5:14 pm
Re: Seattle Washington
Glad to see someone is around,
I may be knocking on your door real soon.
Brian
I may be knocking on your door real soon.
Brian
-
- Master MS/Extra'er
- Posts: 409
- Joined: Sun Jan 30, 2005 11:13 pm
- Location: Monroe, Wa.
- Contact:
Re: Seattle Washington
Hey Brian, great! What are you building?seattlejester wrote:Glad to see someone is around,
I may be knocking on your door real soon.
Brian
-
- MS/Extra Newbie
- Posts: 17
- Joined: Sat Aug 02, 2014 5:14 pm
Re: Seattle Washington
Hi Mario,
It is a 240z with a 7mgte.
I have gotten it to run and drive, but it won't rev past 4500rpm or so. I'm running out of things I can check. May have to try and put put it to your place if I can't make any progress.
It is a 240z with a 7mgte.
I have gotten it to run and drive, but it won't rev past 4500rpm or so. I'm running out of things I can check. May have to try and put put it to your place if I can't make any progress.
-
- Master MS/Extra'er
- Posts: 409
- Joined: Sun Jan 30, 2005 11:13 pm
- Location: Monroe, Wa.
- Contact:
Re: Seattle Washington
Oh that's perfect. I don't have much space for another car right now But if you can drive it that makes thing easy. Just let me know!
Where are you located?
Where are you located?
-
- MS/Extra Newbie
- Posts: 17
- Joined: Sat Aug 02, 2014 5:14 pm
Re: Seattle Washington
I am in Bellevue.
Unsure if it is a simple fix and I drive it there and drive it back kind of deal, or if it would be a leave it at the shop kind of deal. Hopefully the community can give me a few pointers, if I can't figure it out on my end, I sure am glad there is someone who is familiar with these systems when I throw in the towel.
Unsure if it is a simple fix and I drive it there and drive it back kind of deal, or if it would be a leave it at the shop kind of deal. Hopefully the community can give me a few pointers, if I can't figure it out on my end, I sure am glad there is someone who is familiar with these systems when I throw in the towel.
-
- Master MS/Extra'er
- Posts: 409
- Joined: Sun Jan 30, 2005 11:13 pm
- Location: Monroe, Wa.
- Contact:
Re: Seattle Washington
Sounds good. just let me know before you get to frustrated I can just come out to Bellevue as well, not a problem.
-
- MS/Extra Newbie
- Posts: 17
- Joined: Sat Aug 02, 2014 5:14 pm
Re: Seattle Washington
Excellent,
I think it may be wise to move this over to PM's so I don't clutter your thread anymore.
Cheers!
I think it may be wise to move this over to PM's so I don't clutter your thread anymore.
Cheers!
Re: Seattle Washington
Happy to find a MS tuner close by. I am located in Lynnwood.
We need to talk.
I too will go over to PM.
Thanks, Ollie
We need to talk.
I too will go over to PM.
Thanks, Ollie
-
- MS/Extra Newbie
- Posts: 15
- Joined: Mon Mar 29, 2010 9:41 am
Re: Seattle Washington
Hey local Seattle-ish area people. I just got my MS3X engine started and am working on the tune. I'm looking for a bit of help tuning the cruise portion of my map while the engine breaks in.
Specs on the engine/MS3
5.9 Dodge Magnum
10:1 Compression, zero deck, .039 quench
Hughes HER0814ALN-10 cam, 208 duration, .512 lift, 110 lsa
shorty headers
LS2 coils x 8
M1 intake
52 mm throttle body
running full sequential fuel and spark. Let me know if anyone is willing to look at my .msq or discuss tuning theory over a beer. I'll buy.
Connor
Specs on the engine/MS3
5.9 Dodge Magnum
10:1 Compression, zero deck, .039 quench
Hughes HER0814ALN-10 cam, 208 duration, .512 lift, 110 lsa
shorty headers
LS2 coils x 8
M1 intake
52 mm throttle body
running full sequential fuel and spark. Let me know if anyone is willing to look at my .msq or discuss tuning theory over a beer. I'll buy.
Connor
-
- Master MS/Extra'er
- Posts: 409
- Joined: Sun Jan 30, 2005 11:13 pm
- Location: Monroe, Wa.
- Contact:
Re: Seattle Washington
Hi Connor,
Where are you located? If you want to come out to Monroe I'de love to talk MS
Where are you located? If you want to come out to Monroe I'de love to talk MS
-
- Super MS/Extra'er
- Posts: 2639
- Joined: Tue Sep 14, 2004 4:17 pm
- Location: Aberdeen, Wa
Re: Seattle Washington - Tuning / Install
Hey Mario. We should get a PNW meet somewhere. I know there's lots of us here, be cool to get together and talk megasquirt for sure
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
240Z, 2JZ, MS3Pro boost control
-
- MS/Extra Newbie
- Posts: 15
- Joined: Mon Mar 29, 2010 9:41 am
Re: Seattle Washington - Tuning / Install
I live in Lynnwood. Monroe isn't too far away. We pass through there all the time on our way to Stevens Pass. Once this quarter settles in I'll make some time to drive the truck out there. I'm reading as much tuning theory as I can but there is a lot of information out there. the truck pulls good down low but the high rpm seems to fall off. I think I need more advance and I know I need bigger injectors.
Connor
Connor
-
- Master MS/Extra'er
- Posts: 409
- Joined: Sun Jan 30, 2005 11:13 pm
- Location: Monroe, Wa.
- Contact:
Re: Seattle Washington - Tuning / Install
That would be killer. It' been at least 5 years since a West Coast MegaMeet. But I think we could put together a more casual GTG.nathaninwa wrote:Hey Mario. We should get a PNW meet somewhere. I know there's lots of us here, be cool to get together and talk megasquirt for sure
Your duty cycle will tell you the injector story. Have you taken a loot at plugs after a good pull? If you ever think about dyno time I have a connection with Dyno Authority in Redmond.dakotaprerunner wrote:I live in Lynnwood. Monroe isn't too far away. We pass through there all the time on our way to Stevens Pass. Once this quarter settles in I'll make some time to drive the truck out there. I'm reading as much tuning theory as I can but there is a lot of information out there. the truck pulls good down low but the high rpm seems to fall off. I think I need more advance and I know I need bigger injectors.
-
- MS/Extra Newbie
- Posts: 15
- Joined: Mon Mar 29, 2010 9:41 am
Re: Seattle Washington - Tuning / Install
I would be interested in get together as well.
Mario,
Duty cycle at WOT is 100% or greater and I measured the factory injectors at 242 cc/min. Have not pulled the plugs yet but I am going to do that after class tomorrow. One of my problems right now is my laptop is dead... I ordered a new one that should be here this week. I have Tunerstudio and MegaLog Viewer.
Connor
Mario,
Duty cycle at WOT is 100% or greater and I measured the factory injectors at 242 cc/min. Have not pulled the plugs yet but I am going to do that after class tomorrow. One of my problems right now is my laptop is dead... I ordered a new one that should be here this week. I have Tunerstudio and MegaLog Viewer.
Connor
-
- MS/Extra Newbie
- Posts: 6
- Joined: Sun Oct 26, 2014 9:00 am
Re: Seattle Washington - Tuning / Install
I'm interested in a GTG also....
I wouldn't be able to take my buggy if the weather is crappy though...
It sure would be cool to see all the other setups in the area.
I wouldn't be able to take my buggy if the weather is crappy though...
It sure would be cool to see all the other setups in the area.
-
- MS/Extra Newbie
- Posts: 23
- Joined: Wed Mar 11, 2015 12:11 pm
Re: Seattle Washington - Tuning / Install / Consulting
Anyone doing dyno turning for MS in the South King County / Tacoma area?
-
- Master MS/Extra'er
- Posts: 409
- Joined: Sun Jan 30, 2005 11:13 pm
- Location: Monroe, Wa.
- Contact:
Re: Seattle Washington - Tuning / Install / Consulting
I haven't worked with any shops down that way, I usually use Carb Conn in Kirkland