I just recently installed a MS2 and am in the process of getting it running. I have started it, but it is running rough and I am not having any luck getting it to run correctly. I have had some online help from 64Nailhead from New York who has been very helpful, but I really need someone in my garage to help me get it running right. Is there someone in my area who could help me?
Thanks,
Mike
MegaSquirt Tuner in North Houston/Spring Area
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 89
- Joined: Tue Sep 30, 2014 7:00 am
- Location: Houston, TX
Re: MegaSquirt Tuner in North Houston/Spring Area
I am by no means an expert but if you need a second pair of eyes i ve gone thru few learned lessons so i may have some advice. Let me know my ph 713-851-4071
2000 Firebird V6 to LS3 swap.
MS3 Pro
MS3 Pro
Re: MegaSquirt Tuner in North Houston/Spring Area
The go to go in the Houston Area would be Brett Willett. I forgot where he works at, but I could get you in touch with him
-
- MS/Extra Newbie
- Posts: 1
- Joined: Sun Jul 17, 2016 11:06 am
Re: MegaSquirt Tuner in North Houston/Spring Area
Subscribing, I'm looking to switch my buggy from EMS stinger to Megasquirt and will likely need help.
-
- MS/Extra Newbie
- Posts: 13
- Joined: Sat Sep 25, 2010 8:45 pm
Re: MegaSquirt Tuner in North Houston/Spring Area
Hello,
I am Brett Willett!
You may contact me at rnasequence@gmail.com, or call Eurocharged at (713) 462-1600 and ask for me.
I have an AWD dyno, ready to serve.
Sincerely,
Brett Willett
I am Brett Willett!
You may contact me at rnasequence@gmail.com, or call Eurocharged at (713) 462-1600 and ask for me.
I have an AWD dyno, ready to serve.
Sincerely,
Brett Willett