Tuner Tech Help in Ct

Post here if you are seeking local tuner assistance

Moderators: jsmcortina, muythaibxr

Post Reply
Legacyracer
MS/Extra Newbie
Posts: 7
Joined: Mon May 30, 2016 7:51 pm

Tuner Tech Help in Ct

Post by Legacyracer »

Looking for tuner help in Connecticut or nearby. Miata motor in tube chassis race car
TIA
elturbonitroso
Master MS/Extra'er
Posts: 722
Joined: Thu Jan 05, 2006 8:26 pm
Location: CONNECTICUT

Re: Tuner Tech Help in Ct

Post by elturbonitroso »

im in eastern ct and have done a few ms cars.
shainiac
Helpful MS/Extra'er
Posts: 78
Joined: Sat Jul 19, 2014 4:27 pm
Location: CT

Re: Tuner Tech Help in Ct

Post by shainiac »

What part of CT and what version of MS? I'm located in south-central CT
1988 RX-7 TII
MS3Pro Ultimate
5.3L sbe LS, T56 Mag, 8.8" IRS
Twin EFR 6758s
716whp/662wtq
elturbonitroso
Master MS/Extra'er
Posts: 722
Joined: Thu Jan 05, 2006 8:26 pm
Location: CONNECTICUT

Re: Tuner Tech Help in Ct

Post by elturbonitroso »

I'm in willimantic,my car it's a 1990 Toyota corolla with a 4age engine I'm using a ms3x,but I have done a couple cars a Honda civics with a b18,Mitsubishis station,Mazdas fc3, Mazda rx3 and a couple more cars with different Ecu too.
Legacyracer
MS/Extra Newbie
Posts: 7
Joined: Mon May 30, 2016 7:51 pm

Re: Tuner Tech Help in Ct

Post by Legacyracer »

Thanks for your reply's. I'm in central CT. Took the car to EFI Logics in Bethel. Stil,sorting it out.
elturbonitroso
Master MS/Extra'er
Posts: 722
Joined: Thu Jan 05, 2006 8:26 pm
Location: CONNECTICUT

Re: Tuner Tech Help in Ct

Post by elturbonitroso »

what problem you have.
Legacyracer
MS/Extra Newbie
Posts: 7
Joined: Mon May 30, 2016 7:51 pm

Re: Tuner Tech Help in Ct

Post by Legacyracer »

elturbonitroso wrote:what problem you have.
I have a post over in MS3 support with information about the issues I'm having.
Jack917/10
MS/Extra Newbie
Posts: 10
Joined: Sat Oct 21, 2017 6:59 am

Re: Tuner Tech Help in Ct

Post by Jack917/10 »

elturbonitroso wrote:what problem you have.
Hi,

This is what I built and I need a Megasquirt installer desperately. https://www.youtube.com/watch?v=adocRB6Ntbs&t=5s I am in East Hartford and am available anytime as I am retired. To be honest with you, I am also Broke! I can pay for your services after I sell something or with barter. This car will be on every internet car show world wide when it is running as the story behind the builder and the creation of this car is so appealing. This is Not a kit or a new set of wheels on someone's car. It is a ground up creation by a 60 year old guy in his one car garage. You will see the other two cars I built on YouTube also.

Hope you can help.

Thanks,

Jack
Jack917/10
MS/Extra Newbie
Posts: 10
Joined: Sat Oct 21, 2017 6:59 am

Re: Tuner Tech Help in Ct

Post by Jack917/10 »

I have a Subaru EZ30R engine in a replica of a Porsche 917/10 Can Am car https://www.youtube.com/watch?v=adocRB6Ntbs&t=10s which is attached to a Meg MS3 PRO EVO and the software is in my laptop. Everything is ready to go. I need a tuner with a timing light to just monitor everything while we start the engine.

The car is in East Hartford, Ct. You can TEXT me at (860) 604-2339.

Thanks,
Jack
Post Reply