Tuner Tech Help in Ct
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 7
- Joined: Mon May 30, 2016 7:51 pm
Tuner Tech Help in Ct
Looking for tuner help in Connecticut or nearby. Miata motor in tube chassis race car
TIA
TIA
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Tuner Tech Help in Ct
im in eastern ct and have done a few ms cars.
Re: Tuner Tech Help in Ct
What part of CT and what version of MS? I'm located in south-central CT
1988 RX-7 TII
MS3Pro Ultimate
5.3L sbe LS, T56 Mag, 8.8" IRS
Twin EFR 6758s
716whp/662wtq
MS3Pro Ultimate
5.3L sbe LS, T56 Mag, 8.8" IRS
Twin EFR 6758s
716whp/662wtq
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Tuner Tech Help in Ct
I'm in willimantic,my car it's a 1990 Toyota corolla with a 4age engine I'm using a ms3x,but I have done a couple cars a Honda civics with a b18,Mitsubishis station,Mazdas fc3, Mazda rx3 and a couple more cars with different Ecu too.
-
- MS/Extra Newbie
- Posts: 7
- Joined: Mon May 30, 2016 7:51 pm
Re: Tuner Tech Help in Ct
Thanks for your reply's. I'm in central CT. Took the car to EFI Logics in Bethel. Stil,sorting it out.
-
- Master MS/Extra'er
- Posts: 722
- Joined: Thu Jan 05, 2006 8:26 pm
- Location: CONNECTICUT
Re: Tuner Tech Help in Ct
what problem you have.
-
- MS/Extra Newbie
- Posts: 7
- Joined: Mon May 30, 2016 7:51 pm
Re: Tuner Tech Help in Ct
I have a post over in MS3 support with information about the issues I'm having.elturbonitroso wrote:what problem you have.
-
- MS/Extra Newbie
- Posts: 10
- Joined: Sat Oct 21, 2017 6:59 am
Re: Tuner Tech Help in Ct
Hi,elturbonitroso wrote:what problem you have.
This is what I built and I need a Megasquirt installer desperately. https://www.youtube.com/watch?v=adocRB6Ntbs&t=5s I am in East Hartford and am available anytime as I am retired. To be honest with you, I am also Broke! I can pay for your services after I sell something or with barter. This car will be on every internet car show world wide when it is running as the story behind the builder and the creation of this car is so appealing. This is Not a kit or a new set of wheels on someone's car. It is a ground up creation by a 60 year old guy in his one car garage. You will see the other two cars I built on YouTube also.
Hope you can help.
Thanks,
Jack
-
- MS/Extra Newbie
- Posts: 10
- Joined: Sat Oct 21, 2017 6:59 am
Re: Tuner Tech Help in Ct
I have a Subaru EZ30R engine in a replica of a Porsche 917/10 Can Am car https://www.youtube.com/watch?v=adocRB6Ntbs&t=10s which is attached to a Meg MS3 PRO EVO and the software is in my laptop. Everything is ready to go. I need a tuner with a timing light to just monitor everything while we start the engine.
The car is in East Hartford, Ct. You can TEXT me at (860) 604-2339.
Thanks,
Jack
The car is in East Hartford, Ct. You can TEXT me at (860) 604-2339.
Thanks,
Jack