Tuner Help In Austin Texas

Post here if you are seeking local tuner assistance

Moderators: jsmcortina, muythaibxr

Post Reply
Johnous
MS/Extra Newbie
Posts: 8
Joined: Wed Nov 30, 2016 11:34 am

Tuner Help In Austin Texas

Post by Johnous »

Posting here to see if anybody in the central Texas area can help with getting my fuel+spark setup smoothed out. This is on 1978 MGB with a 3.5 rover V8.

I am running a v2.2 board with MSnS. Signal is from a Mallory Unilite shutter in the distributor, and spark is provided to the coil through a BIP373.

Car has been running okay, and I have been using VE Analyze to tune some. However, I am getting consistent lean readings on acceleration which is making me nervous. Would like some guidance from someone who knows. Thanks!
prof315
Super MS/Extra'er
Posts: 3760
Joined: Sun Jan 18, 2009 3:13 am
Location: Melbourne, FL

Re: Tuner Help In Austin Texas

Post by prof315 »

:RTFM:
Linfert Performance/321 Motorsports
SCCA 2019 SM National Champion Crew Chief
SCCA 2023 FP National Champion Tuner/electrical engineer
100s of MS systems built installed and tuned
Support the developers!
Matt Cramer
Super MS/Extra'er
Posts: 17499
Joined: Thu Apr 16, 2009 8:08 pm

Re: Tuner Help In Austin Texas

Post by Matt Cramer »

He may have meant to post this:

:msq:

A lot of us can help remotely if you post up those files.
Matt Cramer -1966 Dodge Dart slant six running on MS3X
v8fiero
MS/Extra Newbie
Posts: 19
Joined: Sat Jul 16, 2016 7:59 am

Re: Tuner Help In Austin Texas

Post by v8fiero »

Hey cool, I'm in Austin too. Unfortunately I am not a tuning expert, but I've got mine up and running and somewhat drivable. If you want another pair of eyes to look over your setup let me know.
Post Reply