Need a tuner in San Antonio/Austin TX area
Moderators: jsmcortina, muythaibxr
Need a tuner in San Antonio/Austin TX area
Me and my roommate built his Mazdaspeed Miata engine with upgraded rods and pistons and upgraded the entire valve train minus the cams themselves. Custom exhaust manifold with a GTX3076R turbo, MS PNP, stock fuel and ignition system and stock o2 at the moment. Also stock trigger wheel. Wanting to get a base map to get the car running with no MAF sensor if that's possible while I get the engine broken in and get the fuel and ignition system upgraded and but a new damper with trigger wheel and wideband O2. Stock ECU will start the car but don't want to run it on the stock ecu with no fail safes right now. Any info or a point in the right direction would be appreciated!
-
- Helpful MS/Extra'er
- Posts: 106
- Joined: Sat Jul 07, 2012 8:18 am
- Location: Cypress (Houston), Texas
Re: Need a tuner in San Antonio/Austin TX area
I may be able to help, but not until you have installed your wideband and upgraded your fuel system to support your intended hp. I have a WB sensor I can use to tune if you do not want to buy one, but it would be a wise decision to have your own.
I'm in Houston and I am familiar with MSMs, PM me if interested.
I'm in Houston and I am familiar with MSMs, PM me if interested.
Tuning in Houston, TX area
https://www.racebushings.com
https://www.racebushings.com