722.6 and NAG1 transmission

'Microsquirt' Transmission Control development and support.

Moderators: jsmcortina, muythaibxr

722.6 and NAG1 transmission

Postby yzn » Sat Jan 30, 2016 1:31 pm

The other day I was looking for a transmission controller to swap my current 722.3 to 722.6 transmission and came across a thread on the msgpio forums for a guy asking for help to control this transmission, a good info was posted on that thread regards the 722.6 http://www.msgpio.com/forums/viewtopic.php?f=4&t=207. Also there was progress in the msgpio to be able to control the 722.6 but it seems to be on hold for now. See page 10 on the Latest Code Updates on the msgpio forum http://www.msgpio.com/forums/viewtopic.php?f=4&t=240&start=90

My question is Could the microquirt be used to control these transmission using the info from that thread and maybe help from the msgpio guys or at least be considered in the future to be able to do that? As these transmission are become popular in the tuning mercedes world.

These transmission was fitted in 4cylinder mercedes engine up to high power amg monsters and quite a few others makers. I believe there could be market for microsquirt in that area as they also see to be popular in chrysler and dodge.
yzn
Helpful MS/Extra'er
 
Posts: 89
Joined: Sat Apr 12, 2014 7:28 am

Re: 722.6 and NAG1 transmission

Postby PUMPISH » Sun May 15, 2016 3:50 pm

yzn wrote:The other day I was looking for a transmission controller to swap my current 722.3 to 722.6 transmission and came across a thread on the msgpio forums for a guy asking for help to control this transmission, a good info was posted on that thread regards the 722.6 http://www.msgpio.com/forums/viewtopic.php?f=4&t=207. Also there was progress in the msgpio to be able to control the 722.6 but it seems to be on hold for now. See page 10 on the Latest Code Updates on the msgpio forum http://www.msgpio.com/forums/viewtopic.php?f=4&t=240&start=90

My question is Could the microquirt be used to control these transmission using the info from that thread and maybe help from the msgpio guys or at least be considered in the future to be able to do that? As these transmission are become popular in the tuning mercedes world.

These transmission was fitted in 4cylinder mercedes engine up to high power amg monsters and quite a few others makers. I believe there could be market for microsquirt in that area as they also see to be popular in chrysler and dodge.



Running 1200hp with this controller http://turbobandit.com/Mercedes-Transmi ... controller
PUMPISH
Master MS/Extra'er
 
Posts: 422
Joined: Mon Jan 28, 2008 3:46 pm
Location: Sweden (Stockholm)

Re: 722.6 and NAG1 transmission

Postby Blown Hemi » Sun Aug 07, 2016 7:26 am

If we could get NAG 1 support it would open up doors to a whole new market. The 722.6 is a fantastic transmission capable of handling over 1000 RWHP (when upgraded like the Southern Hotrod Viking or War Viking) and the Mopar market is begging for something to use it for retrofits or all out race cars. Please do it! :yeah!:
Sometimes there's only one way to find out! Just do it!!!
Blown Hemi
MS/Extra Newbie
 
Posts: 5
Joined: Sun Dec 22, 2013 11:12 am
Location: Indiana

Re: 722.6 and NAG1 transmission

Postby warrjon » Thu Nov 03, 2016 11:46 pm

If the Megashift had supported the 722.6 I would had used this trans instead of the 4L60e
warrjon
MS/Extra Newbie
 
Posts: 5
Joined: Mon Nov 22, 2010 10:42 pm

Re: 722.6 and NAG1 transmission

Postby Trazique » Wed Nov 09, 2016 12:31 pm

Hello I too am in the market looking for a controller for the 722.6, I have converted a 1985 Mercedes 380SL to MS3X (still running strong since 2013-14).
I am currently planning to swap the weak M116 V8 3.8 & 722.3 to a M103 inline-6 3.0 and bolting it to a 722.6

Me: http://www.benzworld.org/forums/r-c107- ... gress.html

My daily driver is a 1999 Mercedes CLK430 (722.6 NAG1). It goes a long way if you have a good test mule and I am ready to get started ASAP.

I am open and ready to be a part of this breakthrough with Megasquirt.
Trazique
MS/Extra Newbie
 
Posts: 3
Joined: Wed Nov 09, 2016 12:10 pm

Re: 722.6 and NAG1 transmission

Postby ganbaa » Sat Jun 24, 2017 12:54 am

.

Sent from my SM-G935F using Tapatalk
ganbaa
MS/Extra Newbie
 
Posts: 10
Joined: Wed Jul 02, 2014 6:10 am

Re: 722.6 and NAG1 transmission

Postby jsmcortina » Thu Sep 21, 2017 10:22 am

I know it has been a while, but is anyone still interested in this?

James
I can supply, repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: viewtopic.php?f=104&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
jsmcortina
Site Admin
 
Posts: 33911
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK

Re: 722.6 and NAG1 transmission

Postby Matt Cramer » Thu Sep 21, 2017 10:40 am

We get people asking about this on a fairly regular basis, and could probably round up one willing to do some real testing.
Matt Cramer
Super MS/Extra'er
 
Posts: 13646
Joined: Thu Apr 16, 2009 8:08 pm

Re: 722.6 and NAG1 transmission

Postby jsmcortina » Thu Sep 21, 2017 10:57 am

Does anyone have access to any additional information? The shift table diagram posted was a good start, but some info on PWM frequencies is rather important.

James
I can supply, repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: viewtopic.php?f=104&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
jsmcortina
Site Admin
 
Posts: 33911
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK

Re: 722.6 and NAG1 transmission

Postby Ainis » Sun Oct 08, 2017 1:56 pm

A post in this thread has some info about frequency:
http://www.msgpio.com/forums/viewtopic.php?p=2004#p2004
Ainis
MS/Extra Newbie
 
Posts: 1
Joined: Sun Oct 08, 2017 1:54 pm


Return to Transmission Control

Who is online

Users browsing this forum: 64nailhead and 1 guest