Cant get Manual-selectable mode to function

'Microsquirt' Transmission Control development and support.

Moderators: jsmcortina, muythaibxr

Post Reply
ap67et10
Helpful MS/Extra'er
Posts: 113
Joined: Mon Apr 05, 2010 11:27 pm
Location: Chico, CA

Cant get Manual-selectable mode to function

Post by ap67et10 »

I have verified that manual mode does work as expected, but when I put the switched ground input to it, I get nothing. I've tried it on both SPAREADC2 and O2 inputs. Giving them ground and will not engage commanded gear like it will when I select "Manual" mode in the settings. Everything else works great, but can't seem to make this work correctly when trying to use the dash switch to engage manual mode. I've verified the wiring to ensure ground is going to each of those pins I tried. Thinking about reloading firmware, but figured I'd ask first. Has 1.0.1 in it on V3 micro controlling 4l80e.

Thanks,
Andrew
nathaninwa
Super MS/Extra'er
Posts: 2637
Joined: Tue Sep 14, 2004 4:17 pm
Location: Aberdeen, Wa

Re: Cant get Manual-selectable mode to function

Post by nathaninwa »

I had some issues too. Try either tps or clt inputs and try again. One worked for me the other didn't. I just don't remember right off hand
Volvo 940, 2jzge, MS3Pro, daily
240Z, 2JZ, MS3Pro boost control
ap67et10
Helpful MS/Extra'er
Posts: 113
Joined: Mon Apr 05, 2010 11:27 pm
Location: Chico, CA

Re: Cant get Manual-selectable mode to function

Post by ap67et10 »

I was just screwing around with it and got it to work on FLEX input. O2 and SPAREADC2 definitely do not work though.
Post Reply