Help with VSS (A341 SC400)

'Microsquirt' Transmission Control development and support.

Moderators: jsmcortina, muythaibxr

Help with VSS (A341 SC400)

Postby Harreh » Fri Oct 06, 2017 11:36 pm

Hi Guys,

I'm in the process of installing one of these in to an SC400/Toyota soarer.

The car has an Adaptronic 440 select standalone ECU running the engine and I'm using the megasquirt in standalone mode for the transcontrol. I have worked out RPM and Shift pattern wiring already.

I'm stuck on the VSS wiring, (attatched is the factory wiring) the signal comes out of the VSS and into the dash which cleans up the signall and passes it over to the factory ECU. I Currently have this signal spliced into my adaptronic and working well. However it appears that it will not function this way using the Microsquirt 3 board.

I'm struggling to understand how to wire this one, I believe I can do it in parallel which is essential for my dash to continue working.

If you guys could help out it would be hugely appreciated
Capture.PNG (15.74 KiB) Viewed 104 times
MS/Extra Newbie
Posts: 6
Joined: Fri Oct 06, 2017 11:26 pm

Return to Transmission Control

Who is online

Users browsing this forum: No registered users and 1 guest