GM 6L50?

'Microsquirt' Transmission Control development and support.

Moderators: jsmcortina, muythaibxr

GM 6L50?

Postby jsdevel » Sat Oct 14, 2017 7:32 pm

I see that GM 5L40e is supported here. Any plans to support GM 6L50? Is it mostly compatible with the 5L40e?
Last edited by jsdevel on Sat Oct 21, 2017 12:56 am, edited 1 time in total.
jsdevel
Experienced MS/Extra'er
 
Posts: 294
Joined: Mon May 23, 2016 3:41 pm
Location: Phoenix, AZ

Re: GM 6L50?

Postby gjestico » Sat Oct 14, 2017 10:04 pm

Have any of those clutch-clutch trannys been supported and tested fully so far ? I hear they are difficult for the aftermarket.
67 Chevelle, LSX V8 engine, EFI., cuppa 80's TPI projects....I like wires.
gjestico
Helpful MS/Extra'er
 
Posts: 141
Joined: Sat Oct 20, 2012 10:19 am
Location: Vancouver, BC

Re: GM 6L50?

Postby jsmcortina » Sun Oct 15, 2017 3:03 am

I don't anticipate these being supported by the Microsquirt Transmission controller.

Typically they need more outputs than the hardware has, but more critically the control algorithms are beyond the scope of the current implementation and would need significant R&D effort.

James
I can supply, repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: viewtopic.php?f=104&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
jsmcortina
Site Admin
 
Posts: 33911
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK

Re: GM 6L50?

Postby jsdevel » Sat Oct 28, 2017 11:30 pm

jsmcortina wrote:I don't anticipate these being supported by the Microsquirt Transmission controller.

Typically they need more outputs than the hardware has, but more critically the control algorithms are beyond the scope of the current implementation and would need significant R&D effort.

James


Got it. Thanks James!
jsdevel
Experienced MS/Extra'er
 
Posts: 294
Joined: Mon May 23, 2016 3:41 pm
Location: Phoenix, AZ


Return to Transmission Control

Who is online

Users browsing this forum: No registered users and 1 guest