GM 6L50?

'Microsquirt' Transmission Control development and support.

Moderators: jsmcortina, muythaibxr

Post Reply
jsdevel
Experienced MS/Extra'er
Posts: 318
Joined: Mon May 23, 2016 3:41 pm
Location: Phoenix, AZ

GM 6L50?

Post by jsdevel »

I see that GM 5L40e is supported here. Any plans to support GM 6L50? Is it mostly compatible with the 5L40e?
Last edited by jsdevel on Sat Oct 21, 2017 12:56 am, edited 1 time in total.
gjestico
Experienced MS/Extra'er
Posts: 165
Joined: Sat Oct 20, 2012 10:19 am
Location: Vancouver, BC

Re: GM 6L50?

Post by gjestico »

Have any of those clutch-clutch trannys been supported and tested fully so far ? I hear they are difficult for the aftermarket.
67 Chevelle, LSX V8 engine, EFI., cuppa 80's TPI projects....I like wires.
jsmcortina
Site Admin
Posts: 39585
Joined: Mon May 03, 2004 1:34 am
Location: Birmingham, UK
Contact:

Re: GM 6L50?

Post by jsmcortina »

I don't anticipate these being supported by the Microsquirt Transmission controller.

Typically they need more outputs than the hardware has, but more critically the control algorithms are beyond the scope of the current implementation and would need significant R&D effort.

James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk

My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
jsdevel
Experienced MS/Extra'er
Posts: 318
Joined: Mon May 23, 2016 3:41 pm
Location: Phoenix, AZ

Re: GM 6L50?

Post by jsdevel »

jsmcortina wrote:I don't anticipate these being supported by the Microsquirt Transmission controller.

Typically they need more outputs than the hardware has, but more critically the control algorithms are beyond the scope of the current implementation and would need significant R&D effort.

James
Got it. Thanks James!
Post Reply