GM 6L50?
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 165
- Joined: Sat Oct 20, 2012 10:19 am
- Location: Vancouver, BC
Re: GM 6L50?
Have any of those clutch-clutch trannys been supported and tested fully so far ? I hear they are difficult for the aftermarket.
67 Chevelle, LSX V8 engine, EFI., cuppa 80's TPI projects....I like wires.
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: GM 6L50?
I don't anticipate these being supported by the Microsquirt Transmission controller.
Typically they need more outputs than the hardware has, but more critically the control algorithms are beyond the scope of the current implementation and would need significant R&D effort.
James
Typically they need more outputs than the hardware has, but more critically the control algorithms are beyond the scope of the current implementation and would need significant R&D effort.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
Re: GM 6L50?
Got it. Thanks James!jsmcortina wrote:I don't anticipate these being supported by the Microsquirt Transmission controller.
Typically they need more outputs than the hardware has, but more critically the control algorithms are beyond the scope of the current implementation and would need significant R&D effort.
James