Hello I would like some education on the microsquirt I have installed.
Here is what I have a 1997 Toyota Land Cruiser AWD with a Cummins 6bt 12 valve, using the stock A343F transmission, I have a pretty good base set up but I am sure there is more available, I just do not know exactly which way I should go about it. One of my main issues is the TCC lock up when driving off road,driving slow and down shifting.
My TCC lock up goes 3 and 4th, and when I am going up a steep grade I am at 2200 rpm in 2nd and slipping the clutches.
Ok I believe I attached my MSG I am new at this
Aisin A343F mated to a Cummins 6bt 12 valve
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 10
- Joined: Mon Apr 17, 2017 10:33 pm
Aisin A343F mated to a Cummins 6bt 12 valve
- Attachments
-
- 343 basic tune.msq
- (25.79 KiB) Downloaded 145 times
-
- MS/Extra Newbie
- Posts: 10
- Joined: Mon Apr 17, 2017 10:33 pm
Re: Aisin A343F mated to a Cummins 6bt 12 valve
Ok after doing a little checking I may have up loaded the in correct msq ok I hope this is correct, I am looking for a little help and maybe having trouble getting the information posted to give people an idea to help me