96 ford bronco ms3 controlling the engine and microsquirt for the e4od trans, i cant seem to get the od cancel switch to work, the wiring seem rather strait forward 12v into the switch, and 2 wires out--one after the light--and one after the switch.
i connected the wire after the switch to the pink o2 wire to microsquirt
and the wire after the light to ALED of microsquirt
i must be missing something, any help would be great.
e40d overdrive cancel switch
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 52
- Joined: Sat Nov 26, 2011 10:26 pm
-
- Super MS/Extra'er
- Posts: 17507
- Joined: Thu Apr 16, 2009 8:08 pm
Re: e40d overdrive cancel switch
The firmware expects the cancel switch to be switched to ground and not 12V.
Matt Cramer -1966 Dodge Dart slant six running on MS3X