hello,
today i drove my 4L80E and i noticed my microsquirt wasnt reading engine rpms. And also noticed that it defaulted to 100% linepressure instantly.
in the settings there is no link betweeen line pressure and rpms, just load through map....so i didnt understand this and thought id share it here.
wwhen the rpms returned halfway through the drive the line pressure returned to normal values from the settings i have.
so is it correct that if there are no rpms? that the microsquirt wwil default to 100% line pressuure for safety maybe?
this is the logfile; you can see the change half way through the file.
https://drive.google.com/open?id=16jHHk ... ZMdT6Z33gn
4L80E defaults to 100% line pressure?
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 436
- Joined: Thu Jan 14, 2016 12:14 am
- Location: Netherlands, The Hague
- Contact:
4L80E defaults to 100% line pressure?
my project page, BBC 454 with LPG vapour injection:
my BBC 454 LPG vapour injection tuning story
my Facebook projectpage:
My 1977 GMC C15 Suburban "Storm"
my BBC 454 LPG vapour injection tuning story
my Facebook projectpage:
My 1977 GMC C15 Suburban "Storm"