I'd like to use the spare analog input to connect an oil pressure sensor to read the pressure at the testport of my 4L80E.
I see in the wiring tables that there is this spare analog input:
- SPAREADC2 (MAF)
Can I hook up a 0-5V pressure sensor to that port? and will it be logged? can it be displayed?
spare analog input for oil pressure
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 435
- Joined: Thu Jan 14, 2016 12:14 am
- Location: Netherlands, The Hague
- Contact:
spare analog input for oil pressure
my project page, BBC 454 with LPG vapour injection:
my BBC 454 LPG vapour injection tuning story
my Facebook projectpage:
My 1977 GMC C15 Suburban "Storm"
my BBC 454 LPG vapour injection tuning story
my Facebook projectpage:
My 1977 GMC C15 Suburban "Storm"
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Re: spare analog input for oil pressure
See the next post down.
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Master MS/Extra'er
- Posts: 435
- Joined: Thu Jan 14, 2016 12:14 am
- Location: Netherlands, The Hague
- Contact:
Re: spare analog input for oil pressure (SOLVED)
thanks James. I re-read the post and now understand. I though the topc was about catching inputs through CAN connection.
http://www.msextra.com/forums/viewtopic ... 38&t=68066
excellent. So I can use the - SPAREADC2 (MAF) to monitor oil pressure of the trans test port. cool
need to read up on how to convert that signal into something one of the gauges can show
http://www.msextra.com/forums/viewtopic ... 38&t=68066
excellent. So I can use the - SPAREADC2 (MAF) to monitor oil pressure of the trans test port. cool
need to read up on how to convert that signal into something one of the gauges can show
my project page, BBC 454 with LPG vapour injection:
my BBC 454 LPG vapour injection tuning story
my Facebook projectpage:
My 1977 GMC C15 Suburban "Storm"
my BBC 454 LPG vapour injection tuning story
my Facebook projectpage:
My 1977 GMC C15 Suburban "Storm"