Latest firmware ?

Do you need some help in using the forums? Any questions about using the forums can be asked here.
Contact a: System Administrator

Moderators: jsmcortina, muythaibxr

Post Reply
thewestie
Experienced MS/Extra'er
Posts: 201
Joined: Thu Jan 23, 2014 4:29 pm
Location: Worcester Ma.

Latest firmware ?

Post by thewestie »

Hi I'm thinking of changing from 3.3.3 to 3.4.0. I've searched here and Google. I saw it awhile ago and need help getting pointed in the rite direction. I'd like to see the bennifits as to a good tune already in play. I would like easier IAC Controll and I think 3.4.0 offers that

Thanks. Steve
87 Turbocoupe 351w swap with a TKO, someday a turbo car again.
MS2 3.0 3.4.0
kjones6039
Super MS/Extra'er
Posts: 1986
Joined: Sat Jul 22, 2006 8:02 pm
Location: Eureka, NV USA
Contact:

Re: Latest firmware ?

Post by kjones6039 »

Did you try the Downloads link at the top of this page?

Ken
1979 Corvette - 383 CID SBC w/ Holley Pro-Jection 900 CFM TBI, 4-85 lb lo-z injectors & Walbro 255 pump
MS2 v3 w/extra 3.4.2 Release
36-1, Delphi LS2/7 coils in wasted spark, driven by v2.0 logic board from JBPerformance
Spartan Lambda Sensor from 14point7
TinyIOX from JBPerformance
thewestie
Experienced MS/Extra'er
Posts: 201
Joined: Thu Jan 23, 2014 4:29 pm
Location: Worcester Ma.

Re: Latest firmware ?

Post by thewestie »

I've looked at manual and diy download. There was a post on the new firmware and its differences. I can't find it. The car is runnitgreat and don't know if its worth starting over with new firmware.
87 Turbocoupe 351w swap with a TKO, someday a turbo car again.
MS2 3.0 3.4.0
billr
Super MS/Extra'er
Posts: 6828
Joined: Sun May 15, 2011 11:41 am
Location: Walnut Creek, Calif. USA

Re: Latest firmware ?

Post by billr »

Okay, I'll try Ken...

OP, did you click on the Downloads link at the top of every page in this forum? I don't have any MS2, but I did take a minute and download/extract from there and the new (3.4.0) firmware package does have "release-notes" and "readme" files included, just like every MS3 package I have downloaded.
thewestie
Experienced MS/Extra'er
Posts: 201
Joined: Thu Jan 23, 2014 4:29 pm
Location: Worcester Ma.

Re: Latest firmware ?

Post by thewestie »

Read me. I'll give that a shot. I've said over and over I'm not a computer guy. This has been one of the most time consuming parts of my build. I try and find info before I post with a help thread. I don't just ask questions cause I'm lazy. Some time I just don't know where to look and it drives me nuts.
Thanks for your help. When I get off phone and on laptop I'll look at read me.
87 Turbocoupe 351w swap with a TKO, someday a turbo car again.
MS2 3.0 3.4.0
thewestie
Experienced MS/Extra'er
Posts: 201
Joined: Thu Jan 23, 2014 4:29 pm
Location: Worcester Ma.

Re: Latest firmware ?

Post by thewestie »

Yes Read me was what I looking for. Thank you for helping me.
87 Turbocoupe 351w swap with a TKO, someday a turbo car again.
MS2 3.0 3.4.0
billr
Super MS/Extra'er
Posts: 6828
Joined: Sun May 15, 2011 11:41 am
Location: Walnut Creek, Calif. USA

Re: Latest firmware ?

Post by billr »

Be sure to look at the Release-Notes, too.
thewestie
Experienced MS/Extra'er
Posts: 201
Joined: Thu Jan 23, 2014 4:29 pm
Location: Worcester Ma.

Re: Latest firmware ?

Post by thewestie »

Yes I read those first. Then looked at it in tunerstudio. I'm going to upgrade it looks like the last one
thanks
87 Turbocoupe 351w swap with a TKO, someday a turbo car again.
MS2 3.0 3.4.0
Post Reply