Page 1 of 1
How do i upgrade my map sensor?
Posted: Thu Apr 27, 2017 4:18 pm
by superboost
Hi guys! I have a mslabs ms2pnp for my (96-97 turbo miata) and it has only a 2.4bar map sensor in it. I want to upgrade it to a 3.5 or 4bar map sensor as i am going to be aiming for more boost in my car. So is upgrading the map sensor as simple as opening my ms2, desolder the old map sensor, solder new map sensor and then choose it from tunerstudio settings?
I see megasquirt users like the mapdaddy 4bar map sensor is this the one to go for?
Any recomendations for what type of map sensor to go for would be appreciated!
Re: How do i upgrade my map sensor?
Posted: Wed May 03, 2017 10:31 am
by superboost
Come on guys! So many pros and not one of you can answear my question?
Re: How do i upgrade my map sensor?
Posted: Wed May 03, 2017 11:56 am
by racingmini_mtl
Any question on custom hardware should be directed at the hardware manufacturer because most people here have no idea what it is. So you should ask mslabs.
Jean
Re: How do i upgrade my map sensor?
Posted: Mon May 08, 2017 6:02 pm
by superboost
racingmini_mtl wrote:Any question on custom hardware should be directed at the hardware manufacturer because most people here have no idea what it is. So you should ask mslabs.
Jean
Thanks for taking the time to help me out.
Re: How do i upgrade my map sensor?
Posted: Mon May 08, 2017 9:06 pm
by benckj
From what I understand it would be as easy as you indicated. The MAP sensor is an add onto the board so simply sway out with larger range. Best to inquire through the site and read docs.
https://www.diyautotune.com/product/map ... orrection/
jim