hi,
ive been told i can switch a soleniod for VVT through a relay by using one of the spare outputs, possibly by using the FIDLE function as i'm not running idle control. has anyone done this before or can anyone tell me the best way to do it.
thanks.
MS1 V3 spare output to run on/off VVT soleniod
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 3
- Joined: Fri Mar 31, 2017 7:05 am
-
- Super MS/Extra'er
- Posts: 17499
- Joined: Thu Apr 16, 2009 8:08 pm
Re: MS1 V3 spare output to run on/off VVT soleniod
The MS1 doesn't let you map FIDLE as a general purpose on/off output. See this link for what outputs are available.
http://www.msextra.com/doc/ms1extra/MS_ ... tm#outputs
http://www.msextra.com/doc/ms1extra/MS_ ... tm#outputs
Matt Cramer -1966 Dodge Dart slant six running on MS3X