Hello
I want to modify my mainboard like this:
http://megasquirt.sourceforge.net/extra/pwmidle.html
buth the manual quote's only the V2.2
Can i make it work on the V3.o and how.
Just change the Q5 to?
Greets Dennis Orgers
PWM on a V3 mainboard
Moderators: jsmcortina, muythaibxr
-
- MS/Extra Newbie
- Posts: 9
- Joined: Fri Feb 03, 2006 6:11 am
- Location: Netherlands
PWM on a V3 mainboard
Pug Powerrrrrrrrrrr
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Look a bit harder, there is V3 info in there.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- MS/Extra Newbie
- Posts: 9
- Joined: Fri Feb 03, 2006 6:11 am
- Location: Netherlands