No Ego Correction???

All Megasquirt 1 support questions. See also the Documentation

Moderators: jsmcortina, muythaibxr

Post Reply
morris
MS/Extra Newbie
Posts: 16
Joined: Mon Sep 19, 2005 12:59 pm

No Ego Correction???

Post by morris »

Hello,

I installed MSnS-extra 029q last night. This is my first attempt to run MSnS. Since installing, EGO correction is no longer functioning. I reinstalled the firmware, but this had no effect.

I have attached my current .msq. Is there a setting I am failing to set/adjust? Has anyone else had this problem?
Top
morris
MS/Extra Newbie
Posts: 16
Joined: Mon Sep 19, 2005 12:59 pm

Duh!

Post by morris »

Okay, I think I found out what I did wrong. Under MoreSettings/LamdaAFR/ I had "Change EGO Limit Above:" Set to 0kpa and "Ego Limit +/-" set to "0."
Top
Post Reply

Return to “MS1/Extra support”