Will MS v3 work on a Stock 04 Hyundai Accent Trigger Wheel?

Keithg · Post by **Keithg** » Wed Apr 26, 2006 6:13 pm

looks like 60-2 teeth to me. MSnS-E can read that. Count the teeth to make sure. There should be 58 teeth (60-2)

KeithG

Posted by email.

238ur50 · Post by **238ur50** » Sat May 27, 2006 7:36 pm

Keithg wrote:looks like 60-2 teeth to me. MSnS-E can read that. Count the teeth to make sure. There should be 58 teeth (60-2)

KeithG

Posted by email.

Keith,

Have you played with megasquirting this car?

Me and a buddy have installed a MS with MSnS-E with fuel only, we are trying to get it running good with just fuel only, we are running into some issue.

Like the car stumbles ready bad if you drive it around, but the car idles perfect, any idea?

Also if you need use to test something on the Ignition side

Thanks
Richie

Keithg · Post by **Keithg** » Sat May 27, 2006 7:40 pm

no clue. I was just commenting that it looks like a 60-2 wheel.

if it runs rough, maske sure your timing is triggering correctly (inverted or no) for accurate timing.

KeithG

Posted by email.

cscm094 · Post by **cscm094** » Sat May 27, 2006 11:37 pm

I'm sorry but I must ask, why in the world would you want to control the fuel/timing on a hyndai accent?!

238ur50 · Post by **238ur50** » Sun May 28, 2006 9:53 pm

cscm094 wrote:I'm sorry but I must ask, why in the world would you want to control the fuel/timing on a hyndai accent?!

LMAO, i said the samething when my buddy wanted to turbo it

its his car

we had an emanage on the car and it just would not let use tune the fuel out

so with the MS will be about to do what we want
btw its a scca car so its kinda a race car

Richie

elturbonitroso · Post by **elturbonitroso** » Mon May 29, 2006 6:43 am

cscm094 wrote:I'm sorry but I must ask, why in the world would you want to control the fuel/timing on a hyndai accent?!

probably because hyundai runs pretty good in P.R. one guy make one run 9.90 in a 1/4 mile.

Megasquirt Support Forum (MSEXTRA)