What ignition method to use?
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 45
- Joined: Tue Feb 22, 2005 9:26 am
What ignition method to use?
I'mlooking into fitting my '89 Dodge spirit with MS. The car has a 6G72 Mitsu 3.0 SOHC. I'm not sure how to do the ignition. I've considered EDIS6 but I dont want to have to get into the hassal of installing a pickup on the crank. The existing setup on the car is an optical pickup distributor with two outputs. It has a tach signal output and a reference output. I'd like to use these output to run wasted spark somehow. I'd prefer not to use the existing disributor to distribute the spark from a single coil. Anyone have any ideas? This is an even fire V6. There is a Mitsu variant of this motor with a crank sensor. Should I investigate that further?
1989 Dodge Spirit 3.0 MS1
A543 5 speed manual
A543 5 speed manual
-
- Helpful MS/Extra'er
- Posts: 106
- Joined: Thu Oct 27, 2005 10:29 am