What is the proper gauge setting for 29q with NB? Best I can find is front O2 but not sure and in tuning ve table it always is set at something like 10 to 19 volts? Is this going to work with auto-tune, cause it seems to adjust but it bugs me that the reading doesn't seem relative.
what brought me to this is that I can't seem to get it to run rich, it's always lean (under stoich at best). the calculator says to use 7.7 req but it runs better up around 12?
Extra on V3, 29q, 500 CI, two 85# holley injectors
The gauge changing features are waaayyy cool!!!
02 gauge setting for NB on 29q
Moderators: jsmcortina, muythaibxr
02 gauge setting for NB on 29q
500 cubic inches, ms extra, 29v, 2.25,four 52# port injectors in an Auto-Nomics four barrel TB