EDIS with neon coil pack..what pins do what?

All Megasquirt 1 support questions. See also the Documentation

Moderators: jsmcortina, muythaibxr

Post Reply
motown menace
MS/Extra Newbie
Posts: 34
Joined: Sat Nov 19, 2005 8:17 pm

EDIS with neon coil pack..what pins do what?

Post by motown menace »

I'm wirng up my EDIS 4 to use a neon coil pack. Does anyone know which wire is power and which towers are controlled (grounded) from which wires? Thanks
PSIG
Super MS/Extra'er
Posts: 1146
Joined: Sat Jun 12, 2004 12:02 am
Location: Seattle, WA area

Post by PSIG »

Left wire = left coil, center wire is +12v and the right wire = right coil. :D
motown menace
MS/Extra Newbie
Posts: 34
Joined: Sat Nov 19, 2005 8:17 pm

Post by motown menace »

Thanks! that's kind of what I figured but I wanted to confirm. I used an ohm meter but it said everythign was connected to everything :|
Post Reply