error's board - use with V3 board, dual VR confirmation?

suberimakuri · Post by **suberimakuri** » Thu May 25, 2006 2:11 am

Hey guys,

Racing on sunday, engine to install and run in on saturday, please help me.
I have MSV3 board built, and errors' daughterboard (awesome).

I've read through a thousand posts and heres what I've got.

Options.

1)
24tooth - use V3 onboard VR pickup, use VROUTINV
2tooth - use T1 & T5 on errors board, feed output to U1 pin11, aka JS10.

2)
24tooth - use T2 & T6 on errors board, feed output to pin 6 u3, with tsel->optoout, tachsel -> optoin. xg1-xg2 removed.
2tooth - use T1 & T5 on errrors board, feed output to U1 pin11, aka JS10.

Please confirm, I've got it all setup for Option1 above at pressent... what have others done?

suberimakuri · Post by **suberimakuri** » Thu May 25, 2006 2:17 am

http://www.rx7club.com/archive/index.php/t-466051.html

yay.