***SUCCESS*** it runs !!!!

All Megasquirt 1 support questions. See also the Documentation

Moderators: jsmcortina, muythaibxr

Post Reply
65looter
Experienced MS/Extra'er
Posts: 371
Joined: Mon Mar 27, 2006 6:56 am
Location: London
Contact:

***SUCCESS*** it runs !!!!

Post by 65looter »

!!!!IT RUNS!!!!

Ok, so far I had it setup to fuel only (as advised here), and it did not work.
Bare in mind that I had not connected my MSD 6A and dizzy to the MS.

So I said to myself, f... it let's connect the MSD 6A and dizzy to it....
5 min later..... I get back in the car, hook up the laptop and turn the ignition key to on, so far so good...
then come the moment of truth: cranking...

at the first crank it STARTED!!!


I now need to tune it and block a hole in my manifold.


Any reason why my car is smoking, it was not while the carb was on. Is it due to the fact that it is not fine tuned yet?


the spec:
342 stroker Ford Racing
MSD 6a + MSD pro billet dizzy
the rest is on my website.

I will post some final pictures later on tomorrow.
Ford 342 stroker | 4inj.TBI
MS2/Extra beta RC3 2.1.0 20090611
Boris740
Experienced MS/Extra'er
Posts: 232
Joined: Tue May 04, 2004 5:46 pm
Location: Aurora, Ontario
Contact:

Post by Boris740 »

Congratulations! Black smoke=rich
Got Knock? - see:
Viatrack Printed Circuit Designs (among other things) http://www.viatrack.ca
Post Reply