Hey, I'm running the v3 board, 029q2 code, 60-2 wheel, stock BMW VR sensor, EDIS6 coilpack, and crown vic wires (6 of the . What is the ideal dwell the EDIS6 coilpack needs, I hear its higher than others, but how many ms for cranking, running, and minimum discharge? Anything else I should be concerned about? I'm running 3 VB921s with spark inverted. Thanks, I can't wait to finally have timing control.
Matt
Ideal dwell for EDIS6 coilpack
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 835
- Joined: Sun May 02, 2004 2:16 pm
- Location: Norwich UK
- Contact:
Ive used :
6.0mSec Cranking
3.6mSec Running
0.1mSec minimum
has worked on a few installs now,
Phil
6.0mSec Cranking
3.6mSec Running
0.1mSec minimum
has worked on a few installs now,
Phil
http://www.msextra.com/manuals/MS_Extra ... _Index.htm for MS1 Extra Manuals
http://www.msextra.com/ms2extra/ for MS2-Extra Manuals
http://www.extraefi.co.uk/cobra/accobra.htm 5.0L TVR powered Cobra Replica (MSnS-E)