Ideal dwell for EDIS6 coilpack

All Megasquirt 1 support questions. See also the Documentation

Moderators: jsmcortina, muythaibxr

Post Reply
matt325is
MS/Extra Newbie
Posts: 18
Joined: Thu Nov 25, 2004 7:27 pm
Location: Olympia, WA

Ideal dwell for EDIS6 coilpack

Post by matt325is »

Hey, I'm running the v3 board, 029q2 code, 60-2 wheel, stock BMW VR sensor, EDIS6 coilpack, and crown vic wires (6 of the 8). What is the ideal dwell the EDIS6 coilpack needs, I hear its higher than others, but how many ms for cranking, running, and minimum discharge? Anything else I should be concerned about? I'm running 3 VB921s with spark inverted. Thanks, I can't wait to finally have timing control.

Matt
Top
daxtojeiro
Master MS/Extra'er
Posts: 835
Joined: Sun May 02, 2004 2:16 pm
Location: Norwich UK
Contact:
Contact daxtojeiro

Post by daxtojeiro »

Ive used :
6.0mSec Cranking
3.6mSec Running
0.1mSec minimum
has worked on a few installs now,
Phil
Image
http://www.msextra.com/manuals/MS_Extra ... _Index.htm for MS1 Extra Manuals
http://www.msextra.com/ms2extra/ for MS2-Extra Manuals
http://www.extraefi.co.uk/cobra/accobra.htm 5.0L TVR powered Cobra Replica (MSnS-E)
Top
Post Reply

Return to “MS1/Extra support”