Can anyone point me to a link which shows where to interface with some of the open DB37 pins on the V2.2 MS board? I have my Daughter Board finished and would prefer to bring the IO for it in or out through the DB37.
Thanks,
Paul
MSnS-E
MT2.25
V2.2 MS
DB37 and Daughter Boards
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 348
- Joined: Tue May 04, 2004 3:46 pm
- Location: Illinois, Central
-
- Site Admin
- Posts: 39617
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Basically you only have X11,X12,X13,X14 unless you start hacking up the board by the connector - that's why I added a second connector on my box.
See the v2.2 schematics on
http://www.bgsoflex.com/v22/msv22.html
James
See the v2.2 schematics on
http://www.bgsoflex.com/v22/msv22.html
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".