Hi All
I have 270cc primaries and 350cc secondaries. This gives me the equivelent of 620cc injectors.
When I am doing all my req_fuel calculations I take it I should base them on 620cc injectors. Would I be right in thinking before the secondaries kick in the code will be clever and increase the PW to effectivly make them look like 620cc for a given table entry in the map.
Cheers
Bazzer
Injector Staging question
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39615
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
I'm 99% sure that you specify the reqfuel to match your primaries only. The staging code takes care of the pulsewidth adjustment when the secondaries are on.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".