My EDIS billet p/u sensor holder is made
Moderators: jsmcortina, muythaibxr
-
- Master MS/Extra'er
- Posts: 667
- Joined: Tue Aug 17, 2004 9:56 pm
- Location: Victoria B.C. Canada
- Contact:
My EDIS billet p/u sensor holder is made
'65 VW Bus with a Subaru EJ20 Turbo conversion , Air to water I/C , LS coils , 14Point7 Spartan 2 & Solid Air Fuel Ratio 52mm gauge.
MS2 Extra V3.0 board
MS2 Extra V3.0 board