The details posted on my site are for 4 pin HEI modules - this is quite an old setup that has been superseded by the 7 pin HEI arrangement. You are probably confusing yourself trying to follow my instructions and wanting to apply it to your 7pin arrangement because (someone jump in here if i'm wrong) the 7 pin system uses the "next cylinder firing" arrangement whereas the 4 pin arrangement that I'm (Still!) using is know as "this cylinder" firing.
Read up to ensure you understand the difference.
Eliot.
From: fiat132t [mailto:tmfmohammad@hotmail.com]
Sent: 29 July 2006 18:53
To: megasquirt-ignition@msefi.com
Subject: hei install
these
http://www.mez.co.uk/ms9.html
-------------------- m2f --------------------
This post is at:
http://www.msefi.com/forums/viewtopic.php?p=133434#133434
-------------------- m2f --------------------
Posted by email.
hei install
Moderators: jsmcortina, muythaibxr
-
- Experienced MS/Extra'er
- Posts: 249
- Joined: Sat Apr 03, 2004 1:39 am
- Location: Milton Keynes - UK
- Contact:
-
- Experienced MS/Extra'er
- Posts: 249
- Joined: Sat Apr 03, 2004 1:39 am
- Location: Milton Keynes - UK
- Contact:
I created it to help others after i had a bit of a tough time trying to understand what I was trying to acheive. But it's a bit long in the tooth and more importantly only relates to the "this cylinder" mode of configuration.fiat132t wrote:thanks elliot
i will follow lances instuctions thought..its just that your distributor phasing process seemed fairly easy to understand as compared to lances
thanks again