Dual coil, wasted spark, 2xVB921 - getting erron on config?
Moderators: jsmcortina, muythaibxr
Dual coil, wasted spark, 2xVB921 - getting erron on config?
Hi!
I'm trying to setup MS V2.2 (024s9 Extra, MT 2.24 b514) to drive Dual coil, wasted spark, 2xVB921 and VR sensor (VR conditionr cicuit build) on 4-cyl Suzuki bike engine.
But!
Im'getting error (fuel pump led on Stim flashes) when I select:
LED17 - Spark output
LED19 - Spark output B
How shoud I config MS?
Please help...
I'm trying to setup MS V2.2 (024s9 Extra, MT 2.24 b514) to drive Dual coil, wasted spark, 2xVB921 and VR sensor (VR conditionr cicuit build) on 4-cyl Suzuki bike engine.
But!
Im'getting error (fuel pump led on Stim flashes) when I select:
LED17 - Spark output
LED19 - Spark output B
How shoud I config MS?
Please help...
Ford Zetec Turbo in progress... MSnS-E, EDIS4, LC-1 ect. The engine is running @ 12Psi
-
- Site Admin
- Posts: 39612
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
What is the text error message?
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Site Admin
- Posts: 39612
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Did you read the MS1/Extra FAQ?
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
-
- Experienced MS/Extra'er
- Posts: 348
- Joined: Tue May 04, 2004 3:46 pm
- Location: Illinois, Central
From FAQ
Q - I have made some settings changes but when I turn it off then on it does not work any more. My fuel pump keeps turning on and off (flashing on stim)
A- You have made a configuration conflict.
Open up the Comms->Mini Terminal in Megatune OR open up Hyperterminal like you did when building the Megasquirt (see the Megamanual)
Q - I have made some settings changes but when I turn it off then on it does not work any more. My fuel pump keeps turning on and off (flashing on stim)
A- You have made a configuration conflict.
Open up the Comms->Mini Terminal in Megatune OR open up Hyperterminal like you did when building the Megasquirt (see the Megamanual)
Ok guys,
I found my fault - didn't set triger possitions A and B in Wheel decoder
spend an hour on Extra site, but didn't find a clue.
I hope Extra code will be well documented soon..
I found my fault - didn't set triger possitions A and B in Wheel decoder
spend an hour on Extra site, but didn't find a clue.
I hope Extra code will be well documented soon..
Last edited by disc on Thu Jul 27, 2006 3:25 pm, edited 1 time in total.
Ford Zetec Turbo in progress... MSnS-E, EDIS4, LC-1 ect. The engine is running @ 12Psi
-
- Site Admin
- Posts: 39612
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Hey! It already says:
Open up the Comms->Mini Terminal in Megatune OR open up Hyperterminal like you did when building the Megasquirt (see the Megamanual)
in the FAQ.
Plus, contributed documentation is always welcome.
James
Open up the Comms->Mini Terminal in Megatune OR open up Hyperterminal like you did when building the Megasquirt (see the Megamanual)
in the FAQ.
Plus, contributed documentation is always welcome.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".