I'm running ms&s-e ms1 2.2
I'm wondering if you can take out some pulse width in the nitrous setup panel. currently I am running very rich due to the extra large(safe) jets supplied with the kit I am using. since I am getting alot of fuel from that can I tell megasquirt to reduce the pulse width be inputing a negitive number thereby reducing the amount of fuel intoduced into the motor my the fuel injectors? I don't currently have smaller jets but will purchase them if there is no simple fix
thanks
jesse
taking fuel out nitrous questions
Moderators: jsmcortina, muythaibxr
-
- Site Admin
- Posts: 39585
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
It is not designed to take fuel out. You _can_ however use the table switching to switch to VE table3 which you can set leaner.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".