Is knock detected retard possible with edis?

All Megasquirt 1 support questions. See also the Documentation

Moderators: jsmcortina, muythaibxr

Post Reply
Malachy
MS/Extra Newbie
Posts: 31
Joined: Sun Apr 23, 2006 12:41 pm
Contact:

Is knock detected retard possible with edis?

Post by Malachy »

Hi all,

i am using edis ignition on my car and have decided i want to use knock detection retard/boost cut however it seems edis uses js10 as does the knock sensing, can this be changed if so can someone help me as i am useless at code?
i already have a KnocksenseMS from borris
regards
Andy
Malachy
MS/Extra Newbie
Posts: 31
Joined: Sun Apr 23, 2006 12:41 pm
Contact:

Post by Malachy »

ok i have just found i can trigger the saw for edis off of led17 therefore meening i can keep js10 for knock detection, can anyone confirm if this will work please?
thanks
superchargingmachine
Experienced MS/Extra'er
Posts: 348
Joined: Tue May 04, 2004 3:46 pm
Location: Illinois, Central

Post by superchargingmachine »

Yes, LED17 works fine for SAW. I just recently switched to LED17 to free up Fidle for PWMidle control.
Malachy
MS/Extra Newbie
Posts: 31
Joined: Sun Apr 23, 2006 12:41 pm
Contact:

Post by Malachy »

ok thankyou thats what i wanted to hear:)
Post Reply