MS 1 whit 2.2 PCB
60-2 wheel
triguer 67
a 10
a return 18
b 40
b return 48
lm1815n whit a standart shematic of the extra pages
i can read the RPM above 500rpm on fuelonly and stock ignition....
but on cranck, or low voltage i can´t read any RPM.....
any sugestion?
thanks
Problem with cranck RPM :(
Moderators: jsmcortina, muythaibxr
-
- Helpful MS/Extra'er
- Posts: 69
- Joined: Thu Jan 13, 2005 4:42 am
- Location: Ivoti/RS/Brsil
-
- Site Admin
- Posts: 39618
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Can you move the VR sensor closer to the 60-2 wheel?
Have you measured the VR sensor output with an AC voltmeter?
Are you sharing the VR sensor with the stock ECU? This may cause a problem.
James
Have you measured the VR sensor output with an AC voltmeter?
Are you sharing the VR sensor with the stock ECU? This may cause a problem.
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".