OK, I'm confused! What mods to the output side are necessary when using a MegaScott adapter board for TFI ignition?
The TFI mod instructions on James' site seem to detail a V2.2 board only for output using Scott's simplified output, but we are assembling a V3.
Can Scott or someone give me a pointer? (Input is straightforward, no issues there.)
Thanks, y'all
Confusion on TFI output using MS1 and V3 board
Moderators: jsmcortina, muythaibxr
Confusion on TFI output using MS1 and V3 board
Jim Franks
MS-extra running full EDIS on v3 MS1
TR7 with Ford 2.3 turbo
MS-extra running full EDIS on v3 MS1
TR7 with Ford 2.3 turbo
-
- Site Admin
- Posts: 39621
- Joined: Mon May 03, 2004 1:34 am
- Location: Birmingham, UK
- Contact:
Give me half an hour and I'll add a few words to the site. My current words "check the schematic" aren't particularly helpful.
James
James
I can repair or upgrade Megasquirts in UK. http://www.jamesmurrayengineering.co.uk
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".
My Success story: http://www.msextra.com/forums/viewtopic ... 04&t=34277
MSEXTRA documentation at: http://www.msextra.com/doc/index.html
New users, please read the "Forum Help Page".